Resonant Inc. (NASDAQ: RESN), a designer of filters for radio frequency (RF) front-ends for the mobile device industry, will host a virtual roadshow webinar on Thursday, June 22, 2017 at 1:30 p.m. Pacific time (4:30 p.m. Eastern time ). George Holmes, CEO, and Jeff Killian, CFO, will host the call followed by a question and answer session. Management will be presenting an overview of the business model, growth initiatives, key milestones and a corporate update. The call will be accompanied by a presentation which can be accessed via the webcast link below. To access the call, please use the following information: Date: Thursday, June 22, 2017Time: 1:30 p.m. Pacific time (4:30 p.m. Eastern time )Dial-in: 1-877-407-3982International Dial-in: 1-201-493-6780Webcast: http://public.viavid.com/index.php?id=124994 A telephone replay will be available approximately two hours after the call and will run through July 22, 2017 by dialing 1-844-512-2921 from the U.S., or 1-412-317-6671 from international locations, and entering replay pin number: 13664694. About Resonant Inc.Resonant is creating software tools and IP & licensable blocks that enable the development of innovative filter designs for the RF front-end, or RFFE, for the mobile device industry. The RFFE is the circuitry in a mobile device responsible for the radio frequency signal processing and is located between the device's antenna and its digital baseband. Filters are a critical component of the RFFE that selects the desired radio frequency signals and rejects unwanted signals and noise. For more information, please visit www.resonant.com. About Resonant's ISN® TechnologyResonant can create designs for difficult bands and complex requirements that we believe have the potential to be manufactured for half the cost and developed in half the time of traditional approaches. The Company's large suite of proprietary mathematical methods, software design tools and network synthesis techniques enable it to explore a much bigger set of possible solutions and quickly derive the better ones. These improved filters still use existing manufacturing methods (i.e. surface acoustic wave (SAW) and/or temperature compensated surface acoustic wave (TC-SAW)) and can perform as well as those using higher cost methods (i.e. BAW or FBAR). While most of the industry designs filters using a coupling-of-modes model, Resonant uses circuit models and physical models. Circuit models are computationally much faster, and physical models are highly accurate models based entirely on fundamental material properties and dimensions. Resonant's method delivers excellent predictability, enabling achievement of the desired product performance in roughly half as many turns through the fab. In addition, because Resonant's models are fundamental, integration with its foundry and fab customers is eased because its models speak the "fab language" of basic material properties and dimensions. Safe Harbor/ Forward-Looking StatementsThis press release contains forward-looking statements, which include the following subjects, among others: the capabilities of expected growth in demand for our designs and technologies. Forward-looking statements are made as of the date of this document and are inherently subject to risks and uncertainties which could cause actual results to differ materially from those in the forward-looking statements, including, without limitation, the following: our limited operating history; our ability to complete designs that meet customer specifications; the ability of our customers (or their manufacturers) to fabricate our designs in commercial quantities; the ability of our designs to significantly lower costs compared to other designs and solutions; the risk that the intense competition and rapid technological change in our industry renders our designs less useful or obsolete; our ability to find, recruit and retain the highly skilled personnel required for our design process in sufficient numbers to support our growth; our ability to manage growth; our ability to invest resources in IP protection and enforcement; and general market, economic and business conditions. Additional factors that could cause actual results to differ materially from those anticipated by our forward-looking statements are under the captions "Risk Factors" and "Management's Discussion and Analysis of Financial Condition and Results of Operations" in our most recent Annual Report (Form 10-K) or Quarterly Report (Form 10-Q) filed with the Securities and Exchange Commission. Forward-looking statements are made as of the date of this release, and we expressly disclaim any obligation or undertaking to update forward-looking statements.