BRAY, England, November 24, 2016 /PRNewswire/ -- Antrica, a worldwide supplier of H.264 video encoding and streaming solutions, unveiled the application of the ANT-6000 Encoder & Decoder in live streaming scenarios. (Photo: http://photos.prnewswire.com/prnh/20161124/442754 ) (Logo: http://photos.prnewswire.com/prnh/20160624/812276-a ) The application of the ANT 6000 E & D set up could be in broadcast or live events - where the ANT-6000 encoder can be connected to a live camera, and a decoder connected to a monitor or screen elsewhere. The encoder and decoder together create a 'real time' experience of both video and audio with very low latency (lag time). Not all encoders and decoders are capable of this - therefore hence why the ANT-6000 E&D are a handy product to know about. The ANT-6000 encoder can accept HD-SDI HDMI DVI-D and VGA signal inputs up to 1920 x 1080 at 60Hz or 60 frames/second and stream out over a LAN in RTSP or MPEG-TS formats. Digital signage display decoders that can decode live streams can display the content together with pre-recorded files. If low latency is required, then the ANT-6000 decoder would need to be used with this encoder. If you wish to display video on a standard monitor, TV or screen Antrica produce a complimentary Decoder in the event customers require a Low Latency HDMI to HDMI or SDI to HDMI link over IP. The ANT-6000 can be powered from a 12v supply or via PoE. Using the latest H264 codecs the ANT-6000 uses data rates from 100Kbits/second up to 25 Mbits/second for blue ray quality streams. The latency can be as low as appx 100m/s. Antrica specialises in the supply and production of low cost high quality Encoders decoders and IP cameras for use in a variety of markets. Based in the UK Antrica provides readily available stock with full technical support for system designers.