- Working with IF to carry out new independent testing of products, which will allow Hybrid and IF to further distinguish the superior mechanical and chemical resistance properties of its products over other products in the market.
- Working to secure "green" certifications, which are expected to be obtained in 2017
- Refining product formulations to fit specific real-world market demands for IF customers
- Marketing & sales support at trade shows including the upcoming World of Concrete in Los Vegas, California in February, 2017
About Hybrid Coating TechnologiesHybrid Coating Technologies (HCT) is a San Francisco-based innovator focused on improving the quality and safety of foams, coatings, and adhesives for industrial and commercial customers around the world. We are the exclusive licensee of Green Polyurethane™ foam, coatings, and adhesives - the world's first-ever patent protected polyurethane-based foam, coatings, and adhesive products that eliminate toxic isocyanates from the entire production process (licensed by Nanotech Industries, Inc.) and the 2015 recipient of the Presidential Green Chemistry Award.The Problem of Conventional Foams/ Coatings/Paint and Isocyanates Conventional polyurethane (PU) paint and coatings have many disadvantages: they are porous, permeable and maintain poor hydrolytic stability. This makes the material highly vulnerable to environmental degradation and ultimately leads to their chemical decomposition, especially when in contact with water. Conventional PU foams such as spray foam insulation are applied via a spraying mechanism that sends toxic isocyanates in the air - exposing workers to the dangers of toxic isocyanates. Strict and costly health & safety measures have to be implemented in the manufacture and application of conventional polyurethane due to the toxicity of isocyanates. This is why regulatory bodies around the world are now looking toward phasing out the use of isocyanates. The Green Polyurethane™ Solution Green Polyurethane™ (also referred to as "HNIPU" - hybrid non-isocyanate polyurethane) is a "hybrid" material that combines the high chemical resistance properties of epoxy and advanced durability and wear resistance properties of polyurethane, making it the perfect coating application for sanitary, high traffic and corrosive surface areas. As a hybrid material with superior properties, Green Polyurethane™ can be applied in one or two coatings, providing a welcome cost-saving substitute to currently used multi-layered coating applications. Its safety features allow it to be applied without the interruption of business due to public exposure, creating an additional 30-60% savings on application costs for customers. As a foam, Green Polyurethane™ provides high R values up to 6.0, energy savings up to 30% and improved tensile strength over conventional foam without using dangerous isocyanates. Recent Anti-Isocyanate Regulatory PressureUS EPA MDI Action Plan: The US EPA (Environmental Protection Agency) is taking progressive action to regulate and potentially ban isocyanates and has mentioned Hybrid's technology as an alternative to toxic polyurethane in its MDI Action Plan against isocyanates (see page 4 Figovsky and Shapovalov) http://www.epa.gov/sites/production/files/2015-09/documents/tdi.pdf. OSHA National Emphasis Program: On June 25, 2013 the Occupational Safety and Health Administration (OSHA), a division of the US Department of Labor, initiated a National Emphasis Program to protect workers from the serious health effects from occupational exposure to isocyanates. Isocyanates are found in polyurethane based products. According to OSHA, "Workers exposed to isocyanates can suffer debilitating health problems for months or even years after exposure which could result in death." California's Department of Toxic Substances Control (DTSC) on March 13, 2014 selected isocyanates and two others substances from a list of 1,100 toxic components that it will focus on with the goal of potentially banning them altogether within the next two years. The announcement is part of a bigger effort to educate consumers and manufacturers about product safety under the Green-Chemistry Law, which went into effect in California last year. Under the law, the agency has jurisdiction to ban these products altogether after following proper protocol. That process includes workshops, a public comment period and requiring manufacturers that want to sell these products in California to determine whether it would be feasible to use safer ingredients.
The US EPA on January 8, 2015 announced that it was taking action to protect consumers from new uses and imports of harmful isocyanates in polyurethane. The EPA's proposed action, a Significant New Use Rule (SNUR) under the Toxic Substances Control Act (TSCA), would require manufacturers (including importers) to notify the EPA at least 90 days before starting or resuming new uses of isocyanates in polyurethane based consumer products. The EPA would then have the opportunity to evaluate the intended use of and if necessary, to take action to prohibit or limit all products containing over one tenth of one percent of the chemical including imported products that make their way into the United States.On September 14, 2016 BASF Corporation, Bayer Material Science LLC, Dow Chemical Company and Huntsman International LLC were named in a $90 Billion False Claims Act (FCA) lawsuit brought by New York law firm Kasowitz, Benson, Torres & Friedman LLP on behalf of the U.S. government for selling billions of dollars worth of harmful isocyanate chemicals but intentionally concealing their dangers to consumers and the U.S. Environmental Protection Agency (EPA) over the past several decades. In the suit, the law firm said that the defendants manufacture and sell isocyanate chemicals such as methylene diphenyl diisocyanate (MDI), polymeric MDI (PMDI) and toluene diisocyanate (TDI). These raw materials make up polyurethane products such as liquid coatings, paints and adhesives; flexible foam used in mattresses and cushions; rigid foam used as insulation; and elastomers used to make automotive interiors.
Public Relations and Media Contact:LCGHeadquarter OfficeSteve Luna702.333.4886www.lcginfo.com