Skip to main content

Global Emerging Orthopedic Implants Market Research Report 2021: Enabling Personalized Orthopedic Care By Leveraging Embedded Sensor And Additive Manufacturing Technologies

DUBLIN, Jan. 20, 2022 /PRNewswire/ -- The "Emerging Orthopedic Implants: Technology Innovation and Growth Opportunities" report has been added to ResearchAndMarkets.
  • Author:
  • Publish date:

DUBLIN, Jan. 20, 2022 /PRNewswire/ -- The "Emerging Orthopedic Implants: Technology Innovation and Growth Opportunities" report has been added to ResearchAndMarkets.com's offering.

This research service explores various emerging orthopedic implant technologies, their potential impact, and the companies to action.

The orthopedic implants industry is assessed in terms of business and technology drivers and restraints. Key funding and acquisition activities over the past 3 years are also investigated.

The growth opportunities offered by drug-eluting implant technology, wearables and implantable orthopedic sensors, robotics, and AI and AR have also been discussed. Strategic recommendations for key industry participants are also put forth in the study.

Orthopedic implants replace or strengthen a damaged, painful, or deformed bone, cartilage, or joint and restore mobility and flexibility in patients with bone conditions. The demand for orthopedic implants is growing with the increasing number of orthopedic surgeries being performed every year. This is mainly due to the prevalence of musculoskeletal conditions and the expanding aging population (high risk of osteoporosis, low bone mass).

The increased life expectancy, sedentary lifestyles with limited physical activity, and the rising incidence of obesity are also resulting in a growing number of orthopedic problems. Several parameters, including implant design, implant material, fabrication method, and patient compliance, influence the success of implantation surgery.

The scientific community is continuously exploring new strategies to minimize the probability of failure of implants and enhance osseointegration for improved implant fixation. Orthopedic implant technology is advancing due to the introduction of new biomaterials that enhance osseointegration, innovative manufacturing technologies that enable customized implants, and embedded sensors that facilitate remote monitoring.

Key Topics Covered:

1.0 Strategic Imperatives1.1 The Strategic Imperative: Factors creating Pressure on Growth in the Orthopedic Implants Market1.2 The Strategic Imperative 1.3 The Impact of the Top Three Strategic Imperatives on the Orthopedic Implants Industry1.4 About the Growth Pipeline Engine1.5 Growth Opportunities Fuel the Growth Pipeline Engine

2.0 Research Context2.1 Research Scope: Key Questions the Research Will Answer2.2 Research Methodology2.3 Key Findings

3.0 Technology Snapshot3.1 Orthopedic Implants Address Degenerative and Inflammatory Bone Diseases3.2 Orthopedic Implant Products can be classified based on their Functional Use3.3 Metals, Polymers, and Ceramics are Conventional Orthopedic Implant Materials3.4 Several Parameters Affect the Success of Orthopedic Implantation Procedures3.5 Technology Segmentation based on Emerging Innovation that is Transforming the Orthopedic Implant Industry3.6 Emerging Orthopedic Biomaterial Technologies Offer Bioactive and Biodegradable Properties3.7 Implant Surface Modification Enhances Osteoconduction and Osseointegration3.8 Implant Surface Coatings are the Most Commonly Explored Surface Modification Technique3.9 Customized or Patient-specific Orthopedic Implants Enable Better Alignment and Stress Distribution3.10 Smart Orthopedic Implants Enable Remote or Continuous Monitoring after Surgery3.11 Pediatric Orthopedic Implants Provide a Wide Range of Options for Diverse Pediatric Conditions3.12 Orthobiologics Enables Rapid and Better Healing of Musculoskeletal Injuries3.13 Orthobiologics is Used to Treat Osteoarthritis and Degenerative Arthritis3.14 The Orthopedic Implant Industry Has Been Slow to Adopt Smart Implant Technology

4.0 Orthopedic Implants Industry - Overview and Assessment4.1 Impact Mapping of Growth Drivers for the Orthopedic Implant Industry4.2 The Prevalence of Musculoskeletal Conditions Will Drive the Orthopedic Implant Industry4.3 Technological Advancements in Embedded Sensors, Implant Materials, and Fabrication Techniques will Drive the Industry4.4 Impact Mapping of Growth Restraints for the Orthopedic Implant Industry4.5 The High Cost of Orthopedic Surgeries and the Poor Reimbursement Policies are Major Restraints to Industry Growth4.6 Technical Difficulties in the Design and the Fabrication of Emerging Implant Types Restrain Industry Growth4.7 A Value-based Healthcare System and the Growing Demand for Minimally Invasive Surgeries Drive Innovation

5.0 Technology Profiles5.1 Technology Segment: Biomaterial Technologies5.1.1 Bioresorbable Magnesium Alloy Compression Screw Implants5.1.2 Compression Screws that Enable Early Bone Attachment and Stronger Implant Fixation5.1.3 Absorbable Nasal Implants that Reduce Nasal Airway Obstruction Symptoms5.1.4 Collagen-based Implants for Anterior Cruciate Ligament Regeneration5.2 Technology Segment: Surface Modification Technologies5.2.1 Porous-coated Total Shoulder System with Improved Fit and Fixation5.2.2 Joint Mobility Restoring Total Wrist Arthroplasty System with Porous Bone-contacting Surfaces5.2.3 3D-printed Porous Titanium Anterior Lumbar Interbody Fusion Implant5.2.4 Additively Manufactured Construct for Vertebral Body Replacement5.3 Technology Segment: Smart Orthopedic Implants5.3.1 Sensor-assisted Total Knee Arthroplasty5.4 Technology Segment: Customized or Patient-specific Orthopedic Implants5.4.1 Customized Craniomaxillofacial Implants to Address Facial Deformities Caused by Black Fungus5.5 Technology Segment: Pediatric Orthopedic Implants5.5.1 A Cannulated Screw System to Address Slipped Capital Femoral Epiphysis in Pediatric Patients5.6 Technology Segment: Orthobiologics5.6.1 Bioactive Bone Graft with a High Level of Osteoblast Differentiation6.0 Industry Trends and Initiatives6.1 Recent Key M&As in the Orthopedic Implants Industry6.2 Notable Funding Activities in the Orthopedic Implants Industry

7.0 Intellectual Property Landscape7.1 Key IP Activity Innovation Themes Include Surface Modification Technologies and Antimicrobial Coatings7.2 Key Patents

8.0 Growth Opportunity Universe8.1 Growth Opportunity 1: Drug-eluting Orthopedic Implants for Improved Clinical Outcomes8.2 Growth Opportunity 2: Wearable and Implantable Orthopedic Sensors for Post-operative Patient Monitoring8.3 Growth Opportunity 3: Robotics, AR, and AI for Accurate Implant Positioning and Design8.4 Growth Opportunity 4: Additive Manufacturing Technologies for Complex and Personalized Implants8.5 Key Conclusions and Strategic Recommendations

9.0 Key Industry Participants9.1 Database of Key Industry Participants

10.0 Appendix

For more information about this report visit https://www.researchandmarkets.com/r/jjzk1j

Media Contact:

Research and Markets Laura Wood, Senior Manager press@researchandmarkets.com For E.S.T Office Hours Call +1-917-300-0470 For U.S./CAN Toll Free Call +1-800-526-8630 For GMT Office Hours Call +353-1-416-8900 U.S. Fax: 646-607-1907 Fax (outside U.S.): +353-1-481-1716

View original content: https://www.prnewswire.com/news-releases/global-emerging-orthopedic-implants-market-research-report-2021-enabling-personalized-orthopedic-care-by-leveraging-embedded-sensor-and-additive-manufacturing-technologies-301464757.html

SOURCE Research and Markets