Global And China Acrylic Acid And Esters Industry Report, 2012-2015
NEW YORK, Dec. 4, 2012 /PRNewswire/ -- Reportlinker.com announces that a new market research report is available in its catalogue: Global and China Acrylic Acid and Esters Industry Report, 2012-2015
Acrylic acid & esters is the general term for acrylic acid (AA) and acrylic esters (AE). In 2007-2011, global capacity of both crude acrylic acid (CAA) and common acrylic esters (CAE), inclusive of methyl acrylate (MA), ethyl acrylate (EA), butyl acrylate (BA)?ethyl hexyl acrylate (EHA),etc., presented an upward trend, with compound growth rates of 2.03% and 3.39%, respectively.
As of end-2011, global capacity of CAA and CAE reached 5.32 million t/a and 4.776 million t/a, mainly distributed in the United States, Europe, Japan and China, which accounted for a total of 88.42% and 81.4%, respectively. In 2011, the global acrylic acid consumption amounted to 5.21 million tons, of which, that used for producing super absorbent polymer (SAP), paints & coatings, adhesives occupied 63%.The acrylic acid & esters industry characterizes a relatively high concentration. In 2011, CAA and CAE capacity of the world's top ten producers, i.e. BASF SE, Dow Chemical Company, Arkema, NIPPON SHOKUBAI, Jiangsu Jurong Chemical Co., Ltd., Formosa Plastics Corporation, Shanghai Huayi Acrylic Acid Co., Ltd., LG Chem, Zhejiang Satellite Petro Chemical Co. Ltd. and Mitsubishi Chemical Corporation held a global share of 91.4% and 84.8%, separately, of which, Jiangsu Jurong Chemical (foreign-controlled), Shanghai Huayi Acrylic Acid and Zhejiang Satellite Petro Chemical are located in the territory of China. Also in 2011, Jiangsu Jurong Chemical, relying on the production capacity of 365,000 t/a CAA and 350,000 t/a CAE, ranked first among Chinese acrylic acid & esters manufacturers, followed by Shanghai Huayi Acrylic Acid. In China, the acrylic acid & esters industry has seen rapid development in recent years, with basic self-sufficiency, but accompanied by fierce competition among manufacturers. From 2007 to 2011, CAA production rose from 697,000 tons to 1.165 million tons, with a CAGR of 13.7%; CAE production climbed from 732,000 tons to 1.163 million tons, with a CAGR of 12.3%. Furthermore, major producers have been continuously expanding their capacity. BASF, the world's largest acrylic acid & esters manufacturer, has reached the level of 160,000 tons/a CAA and 155,000 tons/a CAE via the joint venture construction of BASF-YPC Company Limited with Sinopec Group. In January 2012, BASF announced the establishment of a new set of 190,000 tons/a fine acrylic acid device in the Nanjing Chemical Industry Park, so as to further increase its market share in China. Listed in 2011, Zhejiang Satellite Petro Chemical has raised funds for the expansion of Acrylic Acid & Esters Phase ? Project, with new capacity of 60,000 tons/a acrylic acid and 20,000 tons/a esters; meanwhile, it has perfected the downstream industry chain 30,000 tons/a SAP Technological Transformation Project, which is expected to be put into production in mid-2013. At the end of 2012, SunVic Chemical Holdings Limited's 320,000 tons/a acrylic acid plant in Taizhou will go into operation; in the meantime, the company's another one million tons/a catalytic cracking plant in Taizhou is primarily involved in the production of the main raw material propylene, to improve the upstream chain of acrylic acid & esters industry.
Check Out Our Best Services for Investors
- $2.5+ million portfolio
- Large-cap and dividend focus
- Intraday trade alerts from Cramer
Access the tool that DOMINATES the Russell 2000 and the S&P 500.
- Buy, hold, or sell recommendations for over 4,300 stocks
- Unlimited research reports on your favorite stocks
- A custom stock screener
- Model portfolio
- Stocks trading below $10
- Intraday trade alerts